Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Sunlite WheelGlow Wheel Light
$22.00 - $24.00
- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install
Stan's NoTubes Rim Tape
$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Threaded Valve Extenders
$30.00
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
SRAM XD Driver Freehub Body for 746 Rear Hub
$74.00
- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap
Roval CL 50 Disc Wheelset
$1,750.00
After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found, until the CL 50 Disc was developed, that is. We paired our quiver-killing CLX 50 Disc rim with DT Swiss Competition round spokes, our Aero Flange Disc hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Why disc you ask? With our disc-specific rims, you not only ditch the brake track, but you get a stronger, more impact-resistant rim. This comes at the hands of a disc-specific carbon layup that optimizes stiffness and keeps weight as close to its rim-brake brethren as possible. And all the while, you get incredible brake modulation and power in all conditions. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1515-gram clincher wheelset that's race-ready and wallet-friendly. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, Front quick-release, 12mm endcaps, Rear quick-release, 142x12 thru-axle endcaps - Front Hub: Roval AFD1, Center Lock, sealed cartridge bearings, quick-release or 12mm thru-axle end cap - Front Spoke Pattern: Two-cross/Radial (2:1) - Nipple Type: DT Swiss Pro LockBrass hexagonal - Rear Hub: Roval AFD2, Center Lock, sealed cartridge bearings, DT Swiss 350 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 21 front, 24 rear - Spoke Type: DT Swiss Competition Race T-head - Total Wheelset Weight: 1,515g
DT Swiss Disc Brake Rotor Adaptor Center Lock/6-Bolt
$30.00
DT-Swiss Center Lock Adaptor. Allows 6-bolt rotors to be used on Center Lock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - 230mm version accepts all rotors up to 203mm diameter - 160mm version accepts all rotors up to 160mm diameter
Wheels Manufacturing Inc. Axle Spacer Kit
$99.00
125 piece assortment of precision machined axle spacers (0.5mm to 5mm thickness). - Outside Diameter of Spacers: 16mm - Inside Diameter of Spacers: 10mm Kit includes: - (10) - 0.5mm thick spacers - (30) - 1mm thick spacers - (30) - 2mm thick spacers - (25) - 3mm thick spacers - (15) - 4mm thick spacers - (15) - 5mm thick spacers
Wheels Manufacturing Inc. Freewheel/BB Spacer
$19.95
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
WTB TCS AL 34mm Presta Valve
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
WTB TCS AL 46mm Presta Valve
$25.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
WTB TCS Brass 34mm Valve Stems
$15.95
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
WTB TCS Brass 46mm Valve Stems
$15.95
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
WTB TCS Rim Tape
$15.95 - $24.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Sunlite 24-inch Fat Bike Rim Strip
$4.59
Rubber rim strips for 24-inch diameter fatbike rims. - Sold individually
Sunlite 5mm Hex Skewers
$21.99
• 5mm skewer set (F+R hubs) • Standard 5mm Hex release • Black or Silver anodized finish • Chromoly axles
Sunlite BB Axle Bolt
$2.99
- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt
Sunlite Cassette Spoke Protector
$5.99
Replacement clear plastic spoke guard.
Sunlite Freewheel Spoke Protector
$5.99
- Fits all freewheel hubs - Will not fit Cassette hubs - Type: STD Plastic - Color: Clear
Sunlite Lightnin' Skewer
$31.99
• Locking skewer set • Cro-Mo • 70g (set)
Sunlite Locking Skewers with Key
$39.99
• 5-sided key locking skewer set • Chromoly axles • 6061 anodized aluminum • Includes seat and F+R wheel skewers • 95g (set)
Sunlite Quick Release Skewer (Front, 100mm)
$8.99
- Replacement steel quick release skewers
Sunlite Quick Release Skewer (Front, 133mm)
$9.99
• Replacement aluminum quick release skewers
Sunlite Replacement Q.R. Skewer Nut
$3.99
- Steel end nut for QR skewers
Sunlite Replacement QR Skewer
$8.99
- Replacement rear skewer - Spacing: 135mm - Material: Steel
Sunlite Rim Grommet
$1.00
- Converts Schrader rims to Presta - Rubber - Sold individually
Sunlite Wheel Reflector Set
$5.99
- Eady to install - Spoke mounted - 2 per set
Sta-Tru 20-inch Front Wheel
$43.49
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher
Sta-Tru 26-inch Double Wall Front Wheel
$60.99 - $62.49
Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 26-inch x 1 3/8 - ISO Diameter: 590 / 26 x 1 3/8-inch - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher
Sta-Tru 700c Double Wall Front Wheel
$66.99
Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Valve: Schrader - Tire Type: Clincher
Sta-Tru 700c Double Wall Rear Wheel
$69.99
Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher
Page 1 of 3 Next page